MT12A-UHF - 12 inches amplified speaker with 2 UHF microphones
Page 6
English
B - Control panel
5
MIC/LINE input via COMBO connector
The COMBO connector allows you to connect either a
male XLR plug, or a male Jack mono or stereo connector.
This line level input is balanced.
Please refer to the following chapters for more details
about the different wiring.
6
LINE/MIC selector
Allows you to adapt the incoming impedance to the type
of signal.
When pressed, the input level is adapted to microphone
signals, otherwise it is adapted to line level signals.
7
MIC/LINE fader
Allows you to configure the MIC or LINE input level.
Please make sure the SIG/CLIP LED is not lit for long
periods to ensure an optimal sound quality.
8
LINE input via COMBO connector
This combo socket allows you to plug either a male XLR
or male mono/stereo Jack.
This line level input is balanced.
Please refer to the following chapters for more details
about the different wiring.
9
LINE/AUX fader
Allows you to configure the LINE or AUX input level.
Please make sure the SIG/CLIP LED is not lit for long
periods to ensure an optimal sound quality.
10
LINE/AUX selector
Allows you to selec either the LINE input (COMBO
socket) or the AUX input.
When not pressed, the incoming signal from the COMBO
socket is sent to the amplifier, otherwise the AUX signal
will be sent to the amplifier.
11
AUX input
Line level input via Jack 3.5;
Allows you to retrieve the signal of, for instance, an MP3
player.
12
Equalization zone
These two faders allow you to adjust the bass and treble
settings from -15dB to +15dB.
These adjustments affect the MASTER part of the signal.
13
LED POWER
This LED is lit when the built-in amplifier is turned ON.
14
LED SIG/CLIP
This LED has two functions:
- It lits in yellow when a signal is detected on one of the
two inputs.
- It lits in red when the sum of each signal levels exceeds
0dB.
Please make sure the SIG/CLIP LED is not lit for long
periods to ensure an optimal sound quality.
15
XLR LINE OUT
socket
Allows you to retrieve the sum of each incoming signal
and transmit it to another amplified speaker, mixing
desk, or speaker/amplifier system.
5
6
12
11
9
8
10
7
13
14
15
