8. JOG WHEEL
–This wheel has three functions:
The jog wheel will act as a frame search control when the track in the pause or cue mode, allowing you to
set a point.
The wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the
pitch percentage up to 100%, and turning the wheel counterclockwise will decrease the pitch percentage
down to -100%. The pitch bend will be determined on how long you turn the jog wheel continuously.
The jog wheel can be used with the hold of the X(TIME) and Y(RATIO) buttons to set effects parameter
adjustment
9. CUE/ BUTTON
– Pressing the button will activate the CUE PLAY function and the music will play instantly
from the last cue point.
10. CUE BUTTON
– Pressing the CUE button during playback immediately will pause playback and return the
track to the last set cue point; the CUE indicator will glow in the cue mode. The CUE button can be held
down to momentarily play the music. When you release the CUE button it instantly returns to the CUE
POINT. You can also tap the CUE button to create a STUTTER EFFECT.
11. PLAY/PAUSE BUTTON
– Each press of the PLAY/PAUSE button causes the operation to change from play
to pause or from pause to play. While in play mode the PLAY/PAUSELED will glow and while in pause mode
the PLAY/PAUSE LED will flash.
12. TAP BPM BUTTON
– This button is used to override and manually set a track BPM. Occasionally the built-
in BPM meter may not function as desired. This button allows you to override the internal beat clock and
manually set a track BPMs. To manually set the BPMs; tap this button a few times to a tracks heavy down
beat, the unit will automatically calculate you
r t
apping and translate it
in
to a tracks BPMs. The BPM
READOUT is then d
is
played in the VFD. You can also hold the TAP BPM button and turn the TRACK or
FOLDER knob to adjust the BPM value. To return to the automatic BPM counter, press and hold down the
TAP button for at least 1 seconds and then release.
13. PITCH BEND BUTTONS –
The speed rises while the “+button” is pressed and returns to the original pitch
when the button is released. The speed drops when the “–button” is pressed and returns to the original
pitch when the button is released. These buttons can be used to synchronize the beats of 2 tracks.
14. PITCH SLIDER
– This slider is used to adjust the playback pitch percentage. The slider is a set adjustment
and will remain set until the pitch slider is moved or the pitch function has been turned off.This adjustment
can be made with or without a music source device in the player. The pitch adjustment will remain even if a
music source device has been removed and will reflect on any other music source device inserted into the
player. That is to say, if you set a +6% pitch on one music source device, remove the USB device and
insert another, that music source device too will have a +6% pitch. The amount of pitchbeing applied will
be displayed in the VFD.
15. MASTER TONE
– This button activates the KEY LOCK function. This function allows you to use the PITCH
SLIDER to speed up or slow down playback speed without altering the tonal pitch of the track.
16. PITCH RANGE SELECTOR
– Press this button to choose any pitch range percentages of 6%, 10%, 16%
and +16/-100%.
17. PITCH ON/OFF BUTTON
– This button is used to turn the PITCH SLIDER function on and off. The pitch
percentage can be changed b/-6%, 10%, 16% and +16%/-100%. -100% will allow the least
amount of pitch manipulation and 16% will allow the most amount of pitch manipulation.
18. SOURCE SELECT BUTTON
– This button lets you toggle between USB Port 1 and 2. In other words, you
can select which USB port will be activated and the relational LED will be lit. The function can only be
selected under pause mode.
19. FOLDER KNOB
– Turn FOLDER knob to search the desired folder.
20. HOT CUE/LOOP BANK 1~4
– These buttons are used to store either four cue points or four loops. Each
Bank button can store either a loop or a cue point. When the SAVE LED is lit, press the desired BANK
button to set a cue point, LED lit red, or a loop and LED lit green. Press the desired BANK button to play
the music from the stored cue point instantly and the LED of the activated BANK button will be flashing.
21. EFFECTS AND HOLD BUTTON
ECHO EFFECT
– This button is used to activate and deactivate the Echo effect. The Echo effect adds
an echo to your output signal.
FLANGER EFFEC
T
– This button is used to activate and deactivate the FLANGER effect. The
FLANGER effect distorts the output signal and creates an effect similar to the frequency phasing in and
out of each other.
Djinn Pro - Multimedia platform for mixing and playback
Page 6
EN
With Virtual DJ, this button allows the tempo sync of the two desks. this is the SYNC function.
