ENGLISH
COMPACT700 - Active subwoofer and satellites
Page 6
1 - L and R balanced (XLR) and unbalanced (RCA) inputs
Connect here your mixing desk or any other line level source.
2 - Master volume
This fader affects the volume of the whole amplification system.
(ADJUST THE SOUND LEVEL SO THE CLIP INDICATOR IS NOT
CONTINOUSLY LIT)
3 - L and R balanced outputs
Allow you to retrieve the incoming signal to transmit it, for instance, to
active speakers.
4 - Low-pass outputs settings (in Hertz)
This 3-position switch allows you to limit the bandwidth of the signal sent
to the outputs.
- 22 Hz: Only the sub-basses are eliminated.
- 80 Hz: Any frequency below 80 is eliminated.
- 125 Hz: The frequency above 125 Hz only will be sent.
5 - Signal level LEDs
- SIGNAL indicates an incoming signal
- CLIP indicates an incoming signal above 0 dB.
(ADJUST THE SOUND LEVEL SO THE CLIP INDICATOR IS NOT CONTINOUSLY LIT)
6 - Subwoofer volume
The volume of the subwoofer can be adjusted separately. The middle position is the default configuration. (ADJUST
THE SOUND LEVEL SO THE CLIP INDICATOR IS NOT CONTINOUSLY LIT)
7 - Activation of the limiter
The limiter protects the amplification system, by activating this function you are preventing the system from being
damaged by a too powerful incoming signal.
1
2
3
4
5
6
7
11
9
8
10
12
1
2
3
3 - Presentation
3.1 - Active subwoofer:
1 - Power switch
2 - Power input socket
3 - Satellites SpeakOn outputs.
Caution: the minimum impedance level is 8
Ohms. Please refer to the wiring
instructions in paragraph 4 .
3.2 - More details about the command panel of the subwoofer:
CAUTION
