1. USB PORT -
This is the USB port where you insert your USB mass storage device.
2. SOURCE SELECT -
Use this button to select CD/USB1/USB2/MIDI music. Hold the SOURCE SELECT button
for 2 sec. enter MIDI mode.
3. BRAKE, START DIAL
BRAKE DIAL
a. When in the VINYL mode, this BRAKE dial determines the deceleration speed until play stops when the jog
wheel is held down.
b. When in the NORMAL mode, this BRAKE dial determines the deceleration speed until play stops when
the PLAY/PAUSE button is pressed.
c. When the BRAKE dial is rotated to MIN, play stops quickly; when the dial is rotated to MAX, play stops more
slowly before coming to a complete stop.
START DIAL
a. When in the VINYL mode, this START dial determi nes the acceleration speed until full playback speed is
reached when the jog wheel is backspin.
b. When in the NORMAL mode, this START dial determines the accele ration speed until full playback
speed is reached when the PLAY/PAUSE button is pressed.
c. When the START dial is rotated to MIN, play starts quickly; when the dial is rotated to MAX, play starts more
slowly before full playback.
4. TEMPO RANGE BUTTON
-
Press the button to choose any pitch percentage of 6%, 10%, 16%, and 100%. With
this button you can also switch Pitch Slider on/off, by pressing it for at least 1 sec.
5.
MASTER TONE
- This button activates the KEY LOCK function. This function allows you to use the PITCH SLIDER
to speed up or slow down playback speed without altering the tonal pitch of the track.
6. JOG MODE BUTTON (WHEEL MODE) -
Each press the JOG MODE button to select the WHEEL MODE
of VINYL/NORMAL/A CUE SCRATCH.
a. VINYL -
When wheel mode is set to VINYL, use the JOG WHEEL to activate the scratch effect by touching the
surface of Jog Wheel.
b. NORMAL -
When wheel mode is set to NORMAL, scratch mode is exit, JOG WHEEL can be used to pitch
bend and frame search.
c. A.CUE SCRATCH
IN PLAYBACK MODE
While in play mode and when the touch sensitivity function is active, the JOG WHEEL can be used to return
the unit to last IN point.
Simply touch the JOG WHEEL and unit will immediately return to the last set CUE point (BANK LED is not
blinking) or BANK IN point (LED is blinking) and playback without music interruption.
IN CUE MODE
While in cue mode and when the touch sensitivity function is active, tapping on the JOG WHEEL can be used
to start playback.
The unit will continue to playback until the JOG WHEEL is released. Once the JOG WHEEL is released the
unit will return to the last IN point.
7. PITCH SLIDER -
This slider is used to adjust the playback pitch percentage. The slider is a set adjustment and
will remain set until the pitch slider is move or the pitch function has been turned off.
8.
JOG WHEEL
a. The jog wheel will act as a frame search control when the track in the pause or cue mode, press PLAY button
to create the IN point.
b. The wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the pitch
percentage up to 100%, and turning the wheel counterclockwise will decrease the pitch percentage down to
-100%. The pitch bend will be determined on how long you turn the jog wheel continuously.
c. The jog wheel can be used with the hold of the TIME and RATIO knob to set effects and samples parameter
adjustment.
GENERAL FUNCTIONS AND CONTROLS
Top Panel
Page 31
Содержание CDX6
Страница 38: ...Page 38 DATABASE BUILDER For Windows XP ...
