AMP480/4120/4240 -
1x480/4x120/4x240W PA amplifiers with 1 or 4 x 100V outputs
Page 7
Input connectors
Output terminals
4 - Using your amplifier
CAUTION: Please make sure your amplifier is not plugged in and is OFF when checking cables.
The line-level plug (INPUT) and LINK output are balanced.
However, they can still receive unbalanced signals.
You can also send the incoming signal from one way to another one as described below:
Please use high-quality cables to connect your speakers.
In order to prevent short-circuits, please tin the cables before connecting them to the output terminal.
You will find below a table of correspondence between the amplifier/speakers distance and cable sections in
order to prevent signal quality losses.
Distance
Section
Up to 8 m
1,5 mm²
Between 8 and 12 m
2 mm²
Between 12 and 18 m
3,5 mm²
Between 18 and 30 m
5 mm²
Between 30 and 45 m
8,5 mm²
Between 45 and 60 m
13 mm²
Note: Never use screened cable to carry amplified signal.
