20
5.4.2 Using the SPDIF inputs
You can use
Digital Audio IN
2
16 or the
USB/SPDIF Digital Audio
Input IN 1
15 (with a special adaptor cable, available from Audionet)
as SPDIF digital audio input. Therefore, you can use the sophisticated
digital-to-analog converter of the ART G3 for other digital sources like
CD transports, DAT recorder, too.
1.
Connect the
USB/SPDIF Audio input 15
to the SPDIF output of
the source device using an adapter cable. Alternatively you can use
an optical fiber cable to connect the source device to the
Digi-
tal Input IN
2
16 .
2. Switch on the ART G3, and select in the main menu the digital input
of you choice (refer to section '
Set SPDIF Digital Input
' on page 52).
3. Switch on the source device, and start the playback on the source
device.
The music of the source device is now played back using the sophisti-
cated digital-to-analog converters of the ART G3.
Note
·
The ART G3 supports the following formats: PCM Stereo, sample
rate 32 kHz up to 96kHz, 16 bit and 24 bit resolution.
Important
·
The SPDIF Audio function of the ART G3 can
only
be used if the
loaded disc is stopped, or
no
disc is loaded at all.
·
During playback of any disc with the ART G3 you will hear
only
the
audio from the disc. There will be
no
signal from the SPDIF Audio
interface.
·
Option
Set Auto Off
in the Global Setup menu has to be set to
never off
, if you would like to use the SPDIF Audio function of
the ART G3, otherwise the unit will shut down automatically after 30
minutes (refer to section '
Set AutoOff
' on page 54).
Note:
Pin layout of SPDIF input
1 = not connected
2 = not connected
3 = SPDIF
4 = Ground
Содержание ART G3
Страница 1: ...1 Aligned Resonance Transport Compact Disc Player User s Manual ...
Страница 2: ...2 ...
