Audion Elektro SEALKID, Быстрый старт

Страница: 18 / 22

Troubleshooting 18
Quick Start Guide
6 Troubleshooting
Troubleshooting may only be performed by authorised
maintenance personnel.
If a malfunction occurs, always pull the plug from the socket first,
before attempting to solve the problem.
If the problem cannot be solved using the troubleshooting table
below, please contact your dealer or Audion.
For additional instructions about the performance of
troubleshooting, refer to the complete user manual on
www.audion.com.
Problem Cause Solution
The machine does not
seal
(the sealing wire is not
heating up.)
The plug is not, or not
properly, connected to
the socket.
Put the plug properly
into the socket.
The sealing wire is
defective.
Replace the sealing wire.
The fuse has blown. Replace the fuse.
The sealing switch is
not properly set.
Readjust the sealing
switch.
Internal malfunction. Contact your dealer or
Audion.