AUDIOLINE Watch&Care V130, Руководство по эксплуатации

Страница: 7 / 12

5
Connecting and aligning the transmitter
a
Attention : Position the transmitter with a minimum distance of
1 m to other electronic devices, otherwise there is a risk of mutual
disturbance. Point the upper section of the transmitter towards the
baby or object you want to monitor. Check that the baby or object is
suitably displayed on the receiver.
Operating with batteries (not supplied)
Use a small screwdriver to open
the transmitter’s battery compartment on
the underside. Insert the batteries, pay-
ing attention to correct polarity. Refer to
the diagrams in the battery compartment.
Close the battery compartment again.
The transmitter is operated by means of 4 AAA Alkaline batteries
(not contained in the material supplied). The transmitter cannot be
charged. Insert the batteries before connecting the power adapter
plug.
In the case of a low battery charge, the Power LED flashes slowly.
The batteries must be replaced.
Putting the unit into operation