25
Language
You can select the language to be displayed on screen. The default setting is English.
1. Press
.
2. Select
Language
using or and
press or to
confirm.
3. Select a language using
or
and press
to confirm.
Pair/unpair CAM
The Parent and Baby unit supplied are already paired but you can add or replace Baby units you purchase
separately. You can pair a maximum of four Baby units to your Parent unit. Each new Baby unit must be paired
to the Parent unit before you can use it.
To pair a Baby unit to the Parent unit
Firstly, make sure the Baby and Parent units are turned on. You have 60 seconds to complete the pairing
process once the Parent unit display shows the prompt.
1. Press
on the Parent unit.
2. Press
or
to highlight
PAIR/UNPAIR CAM
, then press
or
.
3. Press
or
again to select
Pair new CAM
.
4. Press
or
to choose a Baby unit slot, then press
to confirm.
5. Press and hold the
and
buttons for 5 seconds on the new Baby unit. The light on the ON/OFF
button of the new Baby unit will flash red and green alternately.
6. When pairing has been successful, the screen will display the image from the newly paired Baby unit. The
light on the ON/OFF button of the new Baby unit will turn red when it is powered by AA batteries or green
when powered by the power adaptor.
To unpair a Baby unit from the Parent unit
Firstly, make sure the Baby and Parent units are turned on.
1. Press
on the Parent unit.
2. Press
or
to highlight
PAIR/UNPAIR CAM
, then press
or
.
3. Press
or
to select
Unpair CAM
, then press
.
4. Press
or
to select the Baby unit you want to unpair, then press
.
5. When the display shows the respective prompt, press the
button.
6. When the display shows the respective prompt, press
.
7. When unpairing has been successful, the screen will display the image from the next paired Baby unit. If
there is no paired Baby unit, the screen will show a respective message.
Operating the Receiver
GB
