− Caller display (CLIP) −
27
5
Caller display (CLIP)
In the case of incoming calls, you can see who is calling you
by means of the caller display facility. If this function is
available on your line, the display shows you the caller’s
telephone number while the telephone is ringing. The
display reports the following information when there is no
telephone number available.
If the message
LEITUNGSFEHLER
appears in the display,
the number has only been partially or incorrectly received.
If the message
NICHT VERFUEGBAR
or
FERNGESPRAECH
appears in the display, the particulars
of the number are not available. This could have been an
international call.
If the message
PRIVAT
appears in the display, the caller has
suppressed the transmission of his telephone number or it
was not possible to transmit the number.
In your absence, all calls will be saved in a caller list with
date and time. Up to 99 numbers are saved in the caller list.
When the list is full, the oldest number is always deleted
from the list.
If calls are registered during your absence, this will be
indicated in the display by the message
NEU
and the
indicator light for new calls will flash.
5.1
Viewing the caller list
Use the
z
button to move to the last phone number
registered. You can then page through the caller list with
y
and
z
. All calls registered will be shown as follows:
REPEAT
The caller
called
several times
The call is new
Time and date
Memory location in the
caller list
Phone
number of
the caller
When you reach the last storage location in the list, the
display will show the message
ENDE DER LISTE
.
Note:
When all newly recorded numbers have been
checked, the new call indicator light goes off and
the
NEU
indicator in the display shows "
00
".
Note:
If no button is pressed within 30 seconds, the
caller list is no longer displayed and the display
shows the current time and date once more along
with the number of telephone numbers stored in
