42
Putting the Telephone into Operation
52
Connecting the charging station
1
Connect the charging sta-
tion as illustrated in the dia-
gram.
For safety reasons, only
use the power adapter plug
supplied.
Inserting the batteries
Insert the batteries in the open bat-
tery compartment. Only use batte-
ries of the type AAA Ni−MH 1.2V.
Pay attention to correct polarity.
Close the battery compartment.
Attaching the belt clip
Press the belt clip on the rear
side of the handset at the top
until it audibly snaps into place.
Charging the batteries
Before using the telephone for the first time, place the handset in the
base station / charging station for
at least
15 hours. Only connect the
plug in the telephone line socket when the battery icon has ceased to
flash.
When the handset is inserted in the base station/charging station properly, you
will hear an acoustic confirmation signal. The handset warms up during the
charging process. This is normal and does not represent a risk. Do not charge
the handset with charging units from other manufacturers.
The current
battery charge status
is indicated in the display:
Full
Half empty
Low
Empty
1
Only applies to telephone sets with at least two handsets;
Checking the
package contents" on Page 51.
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 12 ct/min)
Mains power
outlet
Charging
station
