AUDIOLINE FF894-2, Руководство пользователя

Страница: 8 / 31

6
AUDIOLINE FF894-2 TELEPHONE
Handset No. 2
Remove handset from charging pod and replace handset onto the main base unit (face up)
and a beep will be heard. The Talk LED will flash slowly and the charge LED will
illuminate. If the Talk LED flashes rapidly lift the handset up from the base and replace
again.
Enter number two on the handset keypad, a beep will be heard and the Talk LED will go
off.
The system is now ready to use and is in the standby mode.
NOTE:
Don't use same handset number on more than one handset.
If a three beep error tone is heard, when the handset is placed onto the base unit,
disconnect the handset battery for approximately 10 minutes, reconnect, then retry
registering the handset.
MAKING A CALL WITH THE HANDSET
# #
Press the
[TALK]
button.
#
Dial the telephone number.
# #
To terminate the call, press the
[TALK]
button or replace the handset on the base unit.