AUDIOLINE AB868, Руководство по эксплуатации

Страница: 27 / 40

- Commissioning -
27
As your answering machine saves the current day of the week and the time of day
with every message, the day and time announcement should now be set up as
described in the next chapter.
3.5 Setting the day and time announcement
The answering machine always saves the day of the week and the time of day with
each recorded message so that you always know when callers left their messages.
If you want to enter the day and time announcement for the first time or if you want
to change a day and time announcement that has already been set, please proceed
as follows:
1. Press and hold the
SET/CHECK /
button for 2 seconds. You will hear the day of
the week currently set over the loudspeaker.
2. Press the
SET/CHECK
/
button repeatedly until you hear the correct day of the
week.
3. Press the button. You will hear an announcement of the hour currently set
over the loudspeaker.
4. Press the
SET/CHECK /
button repeatedly until you hear the correct hour
announced.
5. Press the button. You will hear an announcement of the minutes currently
set over the loudspeaker.
6. Press the
SET/CHECK
/
button repeatedly until you hear the correct minutes
announced.
7. Confirm with the button and the complete day and time announcement will
be repeated.
The day and time announcement can be checked at any time. Simply press the
SET/CHECK /
button and you will hear the day of the week and the current time of
day.
Note:
If there is a pause of more than 20 seconds while entering the day and time
announcement, the programming will be interrupted.
If no battery has been fitted or if the battery is discharged, the day and time
announcement must be re-entered if there should happen to be a power failure.