background image

English

 6     

Installation

Battery Charge Indicator

The symbol in the display   indicates when it is time to recharge the battery. 

The symbol has two segments, which disappear as the battery charge decreases. 

When the battery is running low, the symbol   will appear in the display and 

a warning tone will be heard. If the handset is not recharged at this time, the 

phone will cease to function until it is recharged.

Range

The range of the telephone varies depending on various factors in the 

surrounding environment. The radio waves transmitting the call may be 

hindered by obstructions, reducing the range.

Specified ranges require an unobstructed transmission between the handset and 

the base unit. In such ideal conditions, the telephone range can be up to 300 

metres. In a densely populated area, house, apartment, etc. the range of the 

telephone will be reduced. Try to get the best range by relocating the base unit. 

The ideal location for the base unit is a high and unobstructed place.

Out of range warning

If, during a call, the handset is carried too far from the base, a warning tone will 

be heard from the handset. Unless the handset is moved closer to the base unit 

within a few seconds, the call will be lost.

Please note!

When the warning tone is heard, communication is interrupted for the duration 

of the tone. 

Содержание 5016

























Отзывы: