Turning the rotative encoder give direct access to
volume change.
The signal led blink while changes are being made.
The four LEVEL/PRESET led display the level adjustment:
4.2 PRESET SELECTION
Pushing one time the rotative encoder give access to
preset selection. Once the right preset is selected,
push 2 seconds to validated the choice.
The VENU series amplifier come with 4 presets choices:
Preset 1: EXTENDED. Preset with low end extension which give
the feel of a subwoofer addition.
Preset 2: FULL RANGE. Preset used with the combination of a
subwoofer.
Preset 3: MONITOR. Preset when VENU is set up as a floor
monitor.
Preset4: HP. Preset without low end to maximise the power on the vocal frequency range.
Can be used in a four way configuration too.
Preset 5 to 8 are the same but can be modified by user within the help of AF network
manager software.
Page of
9
19
AUDIOFOCUS VENU series
USER’S MANUAL V1.0
