audioengine A5+ setup guide
audioengine A5+ setup guide
Hum
12
13
Adding a new component could bring out hum or buzz that may not
have existed before. Your first assumption may be that something
may be wrong with your new gear but this is generally caused by a
“ground-loop” in your system. Consider these tips for possible solu-
tions:
•
First try moving all components to the same electrical circuit or AC
power outlet.
•
If the hum or buzz is still present, power off all gear and remove the
mini-jack and/or RCA audio cables to and from the A5+.
•
Turn the A5+ back on and check for hum. If the noise is still audible
try plugging the A5+ AC power cord into a different AC outlet.
•
If the hum goes away while the audio cables are still disconnected,
the noise is likely coming from another component in your system.
Connect each component back one at a time and the one that causes
the system to hum is likely the culprit.
•
A common ground-loop source is from cable TV or satellite cables. If
the hum or buzz persists after trying the previous tips, disconnect
the coaxial cable from your cable box, TV, or DVR and if the hum goes
away the cable is the cause. In this case you can get a ground-loop
isolator from your local electronics store. These are inexpensive and
easy to connect inline with your video cable.
•
Sometimes something as simple as a portable heater or dehumidifier
will add noise into your wall wiring that could be picked up by your
audio gear. A dimmer switch on a halogen lamp, a wireless internet
router, or cordless phone near the amplifier, for example, could also
all be culprits.
•
The best overall solutions are to use an AC line filter, plug the unit
into a different AC circuit, or in the case of noise introduced by a
wireless router, for example, move it further away from your audio
gear.
Audioengine 5+ Premium Powered Speakers
General Specifications
Power Consumption
Idle, Mute, Sleep:
10W • 6W •
4W
10.75” (27 cm) x 7” (18 cm) x 7.75” (20 cm) each
15.4 lbs (7 kg)
9.6 lbs (4.4 kg)
31 lbs (14 kg)
11.5” (W) x 14.5” (H) x 21.75” (L)
Dimensions (HWD):
Weight (Left)
:
Weight (Right)
:
Shipping weight:
Shipping box dims:
Environmental
Requirements:
•
Operating temperature: 32° to 88°F (0° to 31°C)
•
Non-operating temperature: -4° to 113°F (-20° to 45°C)
•
Relative humidity: 5% to 95% non-condensing
2.0 powered (active) speaker system
150W peak power total
(50W RMS, 75W peak per channel), AES
Dual Class AB monolithic
5" Kevlar woofers, 20mm silk dome tweeters
3.5mm stereo mini-jack, RCA L/R
RCA L/R audio (full-range, adjustable)
USB Type A (power/charge)
115/240V, 50/60Hz manually-switchable
>95dB (typical A-weighted)
<0.05% at all power settings
<50db
50Hz-22kHz ±1.5dB
10K ohms unbalanced
Output current limiting, thermal over-temperature,
power on/off transient protection, replaceable
external main fuse
Power output:
Amplifier type:
Drivers:
Type:
Inputs:
Outputs:
Voltages:
Signal-to-noise:
THD:
Crosstalk:
Frequency response:
Input impedance:
Protection:
