0
+6
+12
1KHz
2KHz
4KHz
8KHz
16KHz
EQ
ON
MAIN L
MAIN R/PFL
SUB 1
SUB 2
6
12
PFL
PHONES SELECTOR
0
10
0
10
0
10
MAIN
SUB
AUX1/2
AUX3/4
2TK IN
AUX RET
PHONES
OUTPUT LEVEL INDICATOR
10
10
-50
-30
-20
-15
-10
L
MAIN
R
SUB
1
2
0
-50
-30
-20
-15
-10
0
+10
+7
+4
+2
0
-2
-4
-7
-20
-10
-30
CLIP
+10
+7
+4
+2
0
-2
-4
-7
-20
-10
-30
CLIP
PAGE 9
PAGE 8
0
+6
+12
500Hz
250Hz
125Hz
63Hz
6
12
MAIN
SUB
AUX1/2
AUX3/4
EFF TO
0
10
0
10
EFF SEND
EFF LEVEL
PFL
DSP EFFECTS PROCESSOR
MUTE
CLIP
CLIP
CLIP
CLIP
+6
+6
+6
+6
0
0
0
0
-20
-20
-20
-20
10
10
10
10
-50
-50
-50
-50
-30
-30
-30
-30
-20
-20
-20
-20
-15
-15
-15
-15
-10
-10
-10
-10
AUX1
AUX2
AUX3
AUX4
0
0
0
0
9
11
17
12
13
14
16
15
10
POFESSIONAL MIXER
18
20
19
21
22
24
23
25
26
This knob used to control the input signal level from 2TK IN
sockets to main stereo bus and SUB group output.
24
2TK IN:
CONTROL PANEL
CONTROL PANEL
9
This double 7-segment LED display is used for indicating the
work state of the inner effector, and the corresponding effect
are shown as blow.
State display of inner effector:
10
These two buttons are used for selecting the states of the
inner effector.
Buttons for choosing the state:
EFF SEND:
12
This knob is used for controlling the signal level feed to the
inner effector from all input channels and also controlling the
signal level output from the EFF SEND sockets.
EFF LEVEL:
13
This knob is used for controlling volume of the signal level
from the output of the inner effector.
11
This button is used for muting the effect. When you press and
hold the button, the display will flash and the effect will be
muted until you loose the button.
MUTE:
14
This switch allows you to monitor the output signal of the inner
effector, the signal is sampled in front of the EFF fader, so it
has nothing to do with these fader position.
PFL
:
15
AUX1~4 SEND
:
These four faders are used for controlling the output level
from all input channel sent to the AUX1~4 SEND phone
jacks respectively.
16
These 4 level meters indicate the signal level of the
AUX1~AUX4 output
Level meter for AUX output:
EFF To
EFFECT
switch:
17
Press these 4 switch, can feed the effect signal to MAIN
OUT, SUB OUT, AUX OUT1/2 and AUX OUT3/4 respectively.
20
Level meter for SUB1,SUB2 group output
This level meter indicates the signal level of the group
output (SUB1 and SUB2).
21
PHONES SELECTOR :
When no channel PFL switch is pressed, these 4 buttons
choose whitch signal feed to headphone monitor. When
one channel PFL switch is pressed, you can hear the
pressed channel signal sampled in front of this channel
fader.
22
PHONES
volume control
:
This knob controls the volume of the headphones
connected to the headphone jack.
23
AUX RET :
This knob control the input level from an external
processor as external effector etc. connected to AUX
RETURN. The signal will be feed to stereo main bus and
sub bus.
25
Stereo L/R master control:
These two slide faders are used for adjusting the final
output level sent to the stereo output sockets.
26
SUB1, SUB2 group output control:
These two slide faders are used for adjusting the final
output level sent to the group output sockets.
18
Graphic equalizer and EQ ON switch:
This 9-band stereo graphic equalizer will be inserted in the
main output stage, when the EQ ON button is pressed.
19
Level meter for
output:
L,R/PFL
This level meter indicates the signal level of the stereo
main output (Left, Right and PFL). When a PFL button is
pressed, PFL LED light, the Right channel level indicator
turned into input signal level indicator of this channel.
PROFESSIONAL MIXER
Serie
PAMX3
PROFESSIONAL MIXER
Serie
PAMX3
