Audiodesign PAMX1.24 Скачать руководство пользователя страница 2

2

Serie 

PAMX1

PAMX1.24

SET UP MEMO

10

PAM

X 1. 2 4

INSERT 1

INSERT 2

11

Introduction

Congratulations on the purchase of a professional mixing console PAMX1.
The mic pre-amplifiers are of high quality level and ensure the best sound quality and a very high 
dynamic.  

A low noise and distortion-less circuitry assures a natural and transparent reproduction.

Precautions:

Caution: When using any electric product , precautions should always be taken, including the 
following:
1)

Read carefully all instructions before using the product.

2)

To reduce the risk, strict supervision is necessary when the product is used near children.

3)

Don't use the product near to water sources like sinks, kitchens, wet floors, pools, or similar or 

when raining.
4)

In case hearing losses or buzzing occur, please contact a doctor.

5)

This products should be located so that its position does not interfere or reduce its proper 

ventilation.
6)

This product should be site away from heat sources such as radiators  or any other product 

that generate heat.
7)

This product should be connected to a power supply line only of the type described on the 

operating instructions. Check always the status of the power cable.
8)

In case you need to replace the fuse, unplug power supply before replacement. The fuse is 

located over the power INtlet and needs to be replaced with a fuse of same type and value. If the fuse 
blows again, please contact our service. DON'T replace it a second time with a higher value fuse.
9)

Unplug power supply when left unused for a long period of time. Don't draw the cable but pull 

out the plug.
10)

 Make sure that power switch can always be easily reached.

11)

 Make sure that objects or liquids don't fall inside the product.

12)

 The product needs to be inspected by authorized or qualified personnel in case:

A-  The power cable or plug are damaged 
B-  Objects or liquids fall inside the product
C-  The product has been exposed to rain 
D-  The product doesn't appear to operate normally or exhibits a marked change in performance. 
E-  The product has fallen and been damaged.
13)

 DON'T operate on the product, except indications on the user's manual . Please refer to 

authorized and qualified personnel for any other operation.
14)

Caution: Don't place objects on the product's power cable or place it in a position where it 

could be damaged or cause interferences. Improper installation could cause fire risk and/or personal 
injury.

Master section .................................... Pag   6     
Rear panel 

   .. ..............................  Pag   7

Connections........................................  Pag   7
Technical specifications....................... Pag   8 
Block diagram .. .. ............................... Pag   9  
Set Up Memo ..................... ................ Pag 10  
Set Up Memo ....................... .............. Pag 11

Contents

Introduction    .....................................    Pag 2
Precautions.........................................    Pag 2
Conformity ..........................................    Pag 2 
Service       ……..................................    Pag 3
Quick start ..........................................    Pag 3
Mono channel .....................................    Pag 4 
Stereo channel....................................    Pag 5

PROFESSIONAL MIXERS

PREESSIONAL MIXERS

Photocopy this page to remind set up

Содержание PAMX1.24







Отзывы: