audiodata ArtTwo Скачать руководство пользователя страница 11

Страница: 11 / 17

ArtTwo

Page 11

1st edition, January 2019

6.1

Single-wiring connection option

On both loudspeakers connect the cable jumpers supplied to the connection

terminals for 'High' and 'Low'.

To do this, connect the plus low frequency connection (red) to the right-

hand speaker's plus high frequency connection (red).

Then, connect the minus low frequency connection (black) to the right-

hand speaker's minus high frequency connection (black).

Using the right channel's plus cable (red), connect your amplifier's right-hand
plus terminal '

' to the plus connection '

' on your right-hand speaker.

Using the right channel's minus cable (black), connect your amplifier's right-
hand minus terminal '

–

' to the minus connection '

–

' on your right-hand speaker.

Proceed as above in the same way with your left-hand channel's loudspeaker.

For connecting the loudspeaker cables and/or cable jumpers, turn off your amplifier.

Ensure that both loudspeakers are correctly wired up and connected in phase.

Never join '+' and '-' connections together, as depending on its design this can seriously damage

your amplifier.

Содержание ArtTwo


















Результаты поиска

Содержание ArtTwo

Отзывы:

Бренды по названию

Популярные бренды

audiodata ArtTwo, Руководство пользователя

Результаты поиска

Содержание ArtTwo

Отзывы:

Бренды по названию

Популярные бренды