Input Priority
The Rialto 400 features the AudioControl SMART Input Priority feature that allows
for the Rialto 400 to priori`ze certain source inputs to allow for a variety of
opera`onal condi`ons.
The four Input Priority ‘dip switch’ seZngs are as follows:
"
Standby Off/Sleep – In the ‘on’ posi`on the Rialto 400 will not switch
automa`cally into standby/sleep mode and will remain on con`nuously.
"
Digital – In the ‘on’ posi`on the Rialto 400 will priori`ze a digital signal input
ahead of an analog signal. If the digital signal stops, the Rialto 400 will switch
back to an incoming analog signal if present.
"
Analog – In the ‘on’ posi`on the Rialto 400 will priori`ze an analog signal input
ahead of a digital signal. If the analog signal stops, the Rialto 400 will switch
back to an incoming digital signal if present.
"
All On – In the ‘on’ posi`on the Rialto will have no overriding priority and all
inputs will play. Play back should be controlled by the various sources as ‘All-‐On’
could result in both digital and analog sources being heard as no priori`za`on
has been set.
The op`mal set-‐up for the Rialto 400 is as a single-‐source or two-‐source set-‐up with
one digital and/or one analog input allowing for priori`za`on between the two
inputs depending on what is required for your desired set-‐up.
AudioControl User Manual -‐ Rialto 400
12
‘Input Priority’ Se1ngs
Example A
Standby off
& set to
‘DIGITAL’
priority
Opera;on
Example B
Standby off
& set to
‘ANALOG’
priority
Example C
Standby off
& set to
inputs
‘ALL ON’
Example D
Standby on
& set to
inputs
‘All ON’
OFF
ON
Содержание Rialto 400
Страница 1: ......
