background image

page 

THE WARRANTY

People are scared of warranties.  Lots of fine print.  Months of waiting around.  

Well, fear no more, this warranty is designed to make you rave about us to your 

friends.  It’s a warranty that looks out for you and helps you resist the temptation 

to have your friend,  ...who’s “good with electronics”, try to repair your Audio-

Control product.  So go ahead, read this warranty, and then take a few days to 

enjoy your LC7 before sending in the warranty card and comments.

“Conditional” doesn’t mean anything ominous.  The Federal Trade Commis-

sion tells all manufacturers to use the term to indicate that certain conditions 

have to be met before they’ll honor the warranty.  If you meet all of these condi-

tions, we will warrant all materials and workmanship on your LC7 for one year 

from the date you bought it (five years if it is installed by an authorized United 

States AudioControl dealer). We will fix or replace it, at our option, during that 

time.

Here are the conditional conditions:

1. You have to fill out the warranty card and send it to us within 15 days after 

purchasing your LC7.

2. You must keep your sales receipt for proof of purchase, showing when and 

from whom the unit was bought.  We’re not the only ones who require this, so 

it’s a good habit to get into with any major purchase.

3. Your LC7 must have originally been purchased from an authorized Audio-

Control dealer.  You do not have to be the original owner, but you do need a copy 

of the original sales slip.

4. You cannot let anybody who isn’t (A) the AudioControl factory; (B) some-

body authorized in writing by AudioControl to service your LC7.  If anyone 

other than (A) or (B) messes with your LC7, that voids your warranty.

5.  The warranty is also void if the serial number is altered or removed, or if 

LC7 has been used improperly.  Now these sound like big loopholes, but here is 

all we mean by it.

Unwarranted abuse is (A) physical damage (don’t use the LC7 for a jack 

stand); (B) improper connections (120 volts into the power jack can fry the 

poor thing); (C) sadistic things.  This is the best mobile product we know how 

to build, but if you mount it to the front bumper of your car, something will go 

wrong.

6.  If an authorized United States AudioControl dealer installs your LC7, the 

warranty is five years, otherwise the warranty is one year.

Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we 

get the option of fixing your old unit or replacing it with a new one.

LEGALESE SECTION

This is the only warranty given by AudioControl.  This warranty gives you 

specific legal rights that vary from state to state.  Promises of how well the LC7 

will perform are not implied by this warranty.  Other than what we have covered 

in this warranty, we have no obligation, express or implied.  Also, we will not be 

obligated for direct or indirect consequential damage to your system caused by 

hooking up the LC7.

Failure to send in a properly completed warranty card negates any service 

claims.

Содержание LC7

















Отзывы: