AudioControl DQ-61 Скачать руководство пользователя страница 6

Страница: 6 / 32

----------------------------------------------- 6 -----------------------------------------------

C12 volt power, ground and turn-on wires as needed.

Don’t forget the fuse! Note: The DQ-61 has a 12-volt trigger input

but normally you will just let the GTO turn on circuit take care of

that by itself.

Connect your amplifier trigger input to the 12-volt trigger output

of the DQ-61

Turn your amp gains fully down before turning on the system.

Turn on the system and level match your DQ-61 to your source

unit and amplifiers.

On the chassis of the DQ-61, set Signal Delay Mode to

Set-Up

Using the ACR-3 Dash Control, adjust the signal delay between

the Left and Right channels for optimum sound. Check out our

YouTube video for assistance.

11.

Tap the ACR-3 Dash Control and adjust the signal delay between

the front and subwoofer outputs.

12.

On the chassis, change Signal Delay Mode to

Normal

13.

Set the equalization controls for the front, rear, and subwoofer

channels. While your ears are a good reference point, we recom-

mend using an audio analyzer whenever possible.

14.

Adjust the AccuBASS® setting for maximum bass.

15.

Sit back and enjoy the sound

If you have made it to this point and you don’t have any questions,

then “Congratulations”! With that said, we certainly encourage you to

set aside some time to grab a beverage or two, and read through this

entire manual, since there is a tremendous amount of useful informa

tion. Plus it would make the technical writer’s mom proud of her boy.

We now interrupt your reading of this manual to highlight a very

important feature of all AudioControl Autosound products…

Содержание DQ-61

































Результаты поиска

Содержание DQ-61

Отзывы:

Похожие инструкции для DQ-61

Бренды по названию

Популярные бренды

AudioControl DQ-61, Руководство пользователя

Результаты поиска

Содержание DQ-61

Отзывы:

Похожие инструкции для DQ-61

Бренды по названию

Популярные бренды