background image

ACX-300.4

Quick Start Guide PN 914-023-0 Rev A

Specifications

All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously 

change our specifications, like our Pacific Northwest weather, although we are working on changing that as well.

The ACX-300.4 Amplifier

Power Output (RMS)   . . . . . . . . . . . . . . . . . . . . . . . . . . .4x50 Watts @ 4 Ohms

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4x75 Watts @ 2 Ohms

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2x150 Watts @ 4 Ohms Bridged

Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Hz - 30 kHz

Total Harmonic Dist N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0.05%

S/N Ratio   . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 dBa, Ref 50 Watts @ 4 Ohms

Power / Ground Wire Gauge  . . . . . . . . . . . . . . . . . . . Between 8 and 4 AWG

Crossover. . . . . . . . . .12dB/Octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass

Line/Speaker-Level Inputs. . . . . . . . . . . . . . . . . .  500mV - 6V/1V - 12VRMS

Weight   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.1 lbs

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.41

"

 W X 2.97

"

 D X 1.75

"

 H

©2020 AudioControl. All rights reserved.

AudioControl

22410 70th Avenue West, Mountlake Terrace, WA 98043 USA, 

Phone 425-775-8461, FAX 425-778-3166   

 

email: [email protected]

Warranty

For details of the limited warranty for your ACX-300.4, please visit the 

following page on our website:  audiocontrol.com/warranty

Please keep your receipt in a safe place.

Содержание ACX-300.4











Отзывы: