1. Before Installing
Ensure that you have received the following items:
9
AudioCodes’ MP-252 Multimedia Home Gateway
9
1 x RJ-11 telephone cable
9
1 x RJ-45 Ethernet cable
9
12V AC/DC power adaptor (use only supplied)
You’ll also need (not supplied by AudioCodes) the following:
9
A broadband Internet connection
9
ADSL cable (if required)
9
Analog telephones
9
An additional RJ-11 telephone cable (if required)
9
Additional RJ-45 Ethernet cables (if required)
2. Cabling
1.
Connect MP-252-BW to the Internet by cabling the
ADSL
port to
the telephone socket,
using an RJ-11 telephone cable.
Wi-Fi
Power
110/220 VAC
LAN
Computers
POTS Phone
3
2
LAN
ADSL
4
1
2.
Connect the MP-252-BW 10/100Base-T Ethernet ports labeled
LAN
(
1
to
4
) to your LAN computers, using CAT 5 Ethernet cables.
3.
Connect the MP-252-BW FXS telephone ports labeled
Phone
(
1
to
2
) to analog telephones, using RJ-11 telephone cables.
4.
Connect MP-252-BW to a standard 110/220 VAC electrical wall
outlet using the supplied AC/DC power adapter; the MP-252-BW
Status
LED turns on and when initialization completes (~ 2 min.),
the
Status
LED changes from red to green. If MP-252-BW is off,
press the
Power
button located on the rear panel to switch it on.
Before connecting MP-252-BW to power, ensure that the VAC
ratings match, and that you have read the Compliance and
Regulatory Information at
www.audiocodes.com/library
.
For wall mounting MP-252, refer to the supplied documentation.
3. Configuring Network Parameters
To initially authenticate your MP-252-BW Wi-Fi network, open a
Web browser and then log in with the case-sensitive, default
username (“admin”) and password (“admin”).
1.
Verify that your PC’s LAN status displays “Connected” in the ‘Local
Area Connection Status’ window (
Start
menu >
Settings
>
Network
Connections
>
Local Area Connection
).
2.
If the LAN status displays “Disconnected”, click
Properties
, select
‘Internet Protocol (TCP/IP)’, and then click
Properties
. Ensure that
the option ‘Obtain an IP address automatically’ is selected.
3.
Open your Web browser, and then enter the following URL address:
http://mp252.home
.
The MP-252-BW embedded Web server’s ‘Welcome’ screen is
displayed. Click
OK
, and then define a new login password.
4.
In the ‘Quick Setup’ page, choose the Internet connection method.
Consult with your ISP for the required connection type, and then
click
OK
. The Network map displays devices connected to MP-252-
BW. Your PC is now connected to the Internet and you can now
configure VoIP parameters.
If there is no Internet connection, MP-252-BW Web server’s Map
View page (Home) displays a red
icon after the globe icon.
Consult your ISP for valid connection parameters.
