AudioCodes mediapack MP-500 Скачать руководство пользователя страница 436

Страница: 436 / 574

SIP User's Manual

436

Document #: LTRT-12801

MP-500

MSBG

6.17 Auxiliary and Configuration Files Parameters

This subsection describes the device's auxiliary and configuration files parameters.

6.17.1 Auxiliary/Configuration File Name Parameters

The configuration files (i.e., auxiliary files) can be loaded to the device

using the Web

interface (refer to ''Loading Auxiliary Files'' on page

238

). For loading them using the

ini

file,

you need to specify these files in the

ini

file and whether they must be stored in the non-

volatile memory. The table below lists the

ini

file parameters associated with these auxiliary

files. For a detailed description of the auxiliary files, refer to ''Auxiliary Configuration Files''
on page

441

Table

6-57: Auxiliary and Configuration File Parameters

Parameter

Description

General Parameters

[SetDefaultOnIniFileProcess]

Determines if all the device's parameters are set to their
defaults before processing the updated

ini

file.

[0]

Disable - parameters not included in the downloaded

ini

file are not returned to default settings (i.e., retain their

current settings).

[1]

Enable (default)

[SaveConfiguration]

Determines if the device's configuration (parameters and
files) is saved to flash (non-volatile memory).

[0]

= Configuration isn't saved to flash memory.

[1]

= Configuration is saved to flash memory (default).

Auxiliary and Configuration File Name Parameters

Web/EMS: Call Progress Tones File

[CallProgressTonesFilename]

The name of the file containing the Call Progress Tones
definitions. Refer to the

Product Reference Manual

for

additional information on how to create and load this file.

Note:

For this parameter to take effect, a device reset is

required.

[FXSLoopCharacteristicsFileName]

The name (and path) of the file providing the FXS line
characteristic parameters.

Note:

For this parameter to take effect, a device reset is

required.

[FXOLoopCharacteristicsFileName]

The name (and path) of the file providing the FXO line
characteristic parameters.

Note:

For this parameter to take effect, a device reset is

required.

Web/EMS: Prerecorded Tones File

[PrerecordedTonesFileName]

The name (and path) of the file containing the Prerecorded
Tones.

Note:

For this parameter to take effect, a device reset is

required.

Web: Dial Plan
EMS: Dial Plan Name

The name (and path) of the Dial Plan file (defining dial
plans). This file should be constructed using the TrunkPack

Содержание mediapack MP-500































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание mediapack MP-500

Отзывы:

Похожие инструкции для mediapack MP-500

Бренды по названию

Популярные бренды

AudioCodes mediapack MP-500, Руководство пользователя

Результаты поиска

Содержание mediapack MP-500

Отзывы:

Похожие инструкции для mediapack MP-500

Бренды по названию

Популярные бренды