manualshive.com logo in svg

AudioCodes mediapack MP-500, Руководство пользователя

Аудио-кодеки MediaPack MP-500 от AudioCodes - это передовое решение для мультимедийных коммуникаций. Чтобы узнать больше о настройке и использовании этого продукта, загрузите бесплатное руководство пользователя с нашего сайта. {Веб-сайт} - ваш источник для скачивания руководств.

Поделиться
Скачать
background image

Version 5.8 

113 

October 2009 

SIP User's Manual 

 

3. Web-Based Management 

 

3.4.3.7  Routing Settings 

The 

Routing

 submenu allows you to configure the device's routing rules, and includes the 

following items: 

„

 

General 

(refer to ''Configuring General Routing Settings'' on page

 113

) 

„

 

BGP and OSPF

 (refer to ''Configuring BGP and OSPF'' on page

 117

) 

 

3.4.3.7.1  Configuring General Routing Settings 

You can choose to setup your device to use static or dynamic routing. Dynamic routing 
automatically adjusts how packets travel on the network, whereas static routing specifies a 
fixed routing path to destinations. The 

Routing 

item allows you to add, edit and delete 

routing rules from the routing table. 

This page also allows you to add or edit the device's default route devices by changing their 
metric value.  

The device supports platforms with multiple physical WAN devices (ports), which can be 
used for traffic load balancing, failover, and various routing policies. The multiple WAN 
features may also be used to define multiple logical devices (e.g. PPTP VPN, PPPoE) on 
device's with a single WAN port. 

„

 

Load balancing:

 traffic load (bandwidth) is distributed between two WAN interfaces. 

Load balancing uses the IP pairs technique, in which traffic between a pair of source 
and destination IP addresses is routed to the same WAN device for a certain time 
frame. A router load balancing on a per-destination basis uses the parallel routes in a 
round-robin fashion, and forwards an entire destination-based flow in each pass. 

„

 

DSCP-based policy routing:

 you may specify that traffic matching a certain DSCP 

value is routed to a specific device. This is useful for routing different types of data to 
different WAN devices. It is also useful if you want to segregate the voice traffic from 
the data traffic over two lower-cost broadband circuits in an effort to have better voice 
quality. 

„

 

Failover:

 traffic is routed to an active WAN device in case its current WAN device fails, 

ensuring connectivity.  This transfer of traffic is done regardless of DSCP-based policy 
routing rules. An example scenario is Inbound Failover where if a connection fails and 
its IP is no longer accessible, the device notifies the other party to use a different IP, 
using Dynamic DNS. The device supports the following types of failover: 

•

 

Full Link Redundancy: two or more active WAN devices, usually with equal speed 
must be configured. A device set as the default gateway functions as the main 
device, while the other one(s) work in the backup mode. This means that if one of 
the devices fails, the next one take its place. In this configuration, the devices can 
also work in conjunction with the Load Balancing feature to enhance the WAN 
throughput. 

•

 

Rollover Connection: during uptime, a rollover device is kept inactive. This is 
usually a slow link, for example, a dialup. When all other failover devices lose 
connectivity, the rollover device becomes active automatically, and may keep the 
same IP as the main device. This allows the use of a slow connection as a 
backup to the main fast connection. When a failover device regains connectivity, 
the rollover device becomes inactive again. Note that if dialup is done by demand, 
activating the backup device may take a noticeable amount of time. The failover 
process consists of three phases: 

a. 

Detection – performed using a DNS test. 

Содержание mediapack MP-500































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для mediapack MP-500

IAI ERC3 User Manual preview
ERC3
Бренд: IAI Страницы: 5
Thompson DWG875 User Manual preview
DWG875
Бренд: Thompson Страницы: 89
H3C SR6602-I AI Series Installation, Quick Start preview
SR6602-I AI Series
Бренд: H3C Страницы: 29
Dr. Neuhaus TAINY IQ Security Instructions preview
TAINY IQ
Бренд: Dr. Neuhaus Страницы: 2
Gardena 19000 Operator'S Manual preview
19000
Бренд: Gardena Страницы: 29
Four-Faith F8L10GW-L User Manual preview
F8L10GW-L
Бренд: Four-Faith Страницы: 32
IBM Provntia MX4006 Getting Started preview
Provntia MX4006
Бренд: IBM Страницы: 2
Kiwi TLG3901BLV2 User Manual preview
TLG3901BLV2
Бренд: Kiwi Страницы: 67
Titan Logix TPM 053 Installation & Operation Manual preview
TPM 053
Бренд: Titan Logix Страницы: 50
purexx PX-iP Operating Manual preview
PX-iP
Бренд: purexx Страницы: 50
RTA 460BM Product User Manual preview
460BM
Бренд: RTA Страницы: 58
Arris BGW210 Get Started preview
BGW210
Бренд: Arris Страницы: 4
3Com VCX V7111 User Manual preview
VCX V7111
Бренд: 3Com Страницы: 464
Daikin intelligent Touch Manager BACnet DCM014A51 Quick User Manual preview
intelligent Touch Manager BACnet DCM014A51
Бренд: Daikin Страницы: 14
NETGEAR VVG834 Datasheet preview
VVG834
Бренд: NETGEAR Страницы: 2
NETGEAR VEVG2660-1TKSAS User Manual preview
VEVG2660-1TKSAS
Бренд: NETGEAR Страницы: 116
SAGEMCOM FAST 5688W User Manual preview
FAST 5688W
Бренд: SAGEMCOM Страницы: 20
Icotera i6800 User Manual preview
i6800
Бренд: Icotera Страницы: 33

Бренды по названию

Популярные бренды

Загрузить еще бренды