5
|
P a g e
Assigning an IP Address to the Device
The default IP address depends on your MP-1xx model:
FXS-only models and FXS-with-FXO models:
10.1.10.10
FXO-only models:
10.1.10.11
For all MP-1xx models, the default subnet mask is 255.255.0.0 and the Default Gateway IP address is 0.0.0.0.
You can change the IP address using any of the following methods:
Accessing the device's Web-based management interface from a computer using the default IP address
Accessing the device's interactive voice response (IVR) menu, using touch-tone dialing (DTMF tones) on
a standard telephone connected to one of the device's FXS ports
ASSIGNING AN IP ADDRESS THROUGH THE WEB-BASED MANAGEMENT INTERFACE
Use the device's factory default IP address to initially access the device's Web-based management interface
and then change it to suit your network addressing scheme for subsequent connectivity.
1.
Using a crossover RJ-45 Ethernet cable, connect the device's Ethernet port located on the rear panel
and labeled
Ethernet
, to the LAN port of your computer.
2.
Change the IP address of your computer to correspond with the device's default IP address and subnet
mask.
