Version 7.2
13
Mediant MSBR
Configuration Note
4. Data CLI Changes
4
Data CLI Changes
This chapter summarizes the changes to the CLI interface for Version 7.2.
4.1
DSL Operation Mode
All subcommands from the DSL interface were removed because the DSL operation mode
was changed. From this version onwards, users cannot configure the specific DSL
operation mode ADSL or VDSL. These operation modes will be automatically selected by
the device through sensing the signals on the DSL line.
4.2
Command Path Changes
In Version 7.2, the location for specific commands has been changed in the command tree.
Example:
Binding an application configuration to an interface.
Version 6.8:
# configure system
(config-system)# bind interface gigabitethernet 0/0 voip
Version 7.2:
# configure network
(config-network)# bind interface gigabitethernet 0/0 voip
The following table describes the changes in Configuration commands:
Table
4-1: Configuration Command Path Changes
Command
Description
Command Path
Version 6.8
Version 7.2
bind
Binds application
to interface.
config-system
config-network
interface
Configures OSN
interface.
config-system
config-network
hostname
Sets product
hostname.
config-system
config-network
nqm
Configures
Network Quality
Monitoring.
config-system
config-network
tftp-server
Internal TFTP
server
config-system
config-network
logging
Logging
configuration
config-system
config-troubleshoot
access-list
Network access
list.
config-voip
config-network
dhcp-server
DHCP server
configuration.
config-voip (was
previously dhcp)
config-network
dns
DNS
configuration.
config-voip
config-network
