AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 828 / 1248

User's Manual 828 Document #: LTRT-10375
Mediant 500 MSBR
51.3.4.1.4 Managing Locations
The Locations tab displays all redirect locations of where the configuration file is stored,
relevant to the currently logged-in user:
Figure 51-7: Locations Tab - Redirect Server GUI
You must configure the location as an HTTP or HTTPS URL. You can also group devices
with different locations. This allows you to configure a new target for all devices in the
group, by changing a single location entry.
The table below describes the action icons:
Table 51-5: Locations Action Icons
Icon Name
Edit Modifies the location
Trash Deletes the location
New location
entry
Adds a new location
51.3.4.1.5 Managing Devices
The Devices tab displays all devices (defined by MAC address) relevant to the currently
logged-in user:
Figure 51-8: Devices Tab - Redirect Server GUI
The following information is displayed per device:

MAC address - MAC addresses are displayed with colons between every second digit.
However, when configuring the MAC address, colons as well as upper or lower case
are of no importance.

Redirection target (location)

Time of the last redirection

User comment
You can filter the displayed list by MAC address, location, or comment.
You can configure multiple MAC addresses (devices) per location. This allows you to use
the same URL for multiple devices.