AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 43 / 1037

CHAPTER 4 Configuring VoIP LAN Interface for OAMP
Mediant 4000 SBC | User's Manual
4 Configuring VoIP LAN Interface for OAMP
You can change the device's default OAMP IP address, using any of the following methods:
■ Embedded HTTP/S-based Web server (see Web Interface)
■ Embedded CLI (see CLI)
■ ini file (see Changing OAMP Address through ini File on page 13
If you are implementing the High Availability feature, see also HA Overview for initial
setup.
Changing OAMP Address through Web Interface
You can change the device's default OAMP networking address through the Web- based
management tool (Web interface). The default IP address is used to initially access the device.
➢
To change the default OAMP network address through Web interface:
1. Connect one of the first two Ethernet ports (GE 1 or GE 2) on the top-left row of the SBC
module, located on the front panel directly to the network interface of your computer, using a
straight-through Ethernet cable.
2. Change the IP settings of your computer to correspond with the default OAMP IP address and
subnet mask of the device.
3. Access the Web interface:
a. On your computer, start a Web browser and in the URL address field, enter the default IP
address of the device; the Web interface's Web Login screen appears:
- 10 -