AudioCodes Mediant 3000, Руководство пользователя

Страница: 846 / 872

User's Manual 846 Document #: LTRT-89729
Mediant 3000
Parameter Description
IPOutboundManipulation_Trigger,
IPOutboundManipulation_ManipulatedURI,
IPOutboundManipulation_RemoveFromLeft,
IPOutboundManipulation_RemoveFromRight,
IPOutboundManipulation_LeaveFromRight,
IPOutboundManipulation_Prefix2Add,
IPOutboundManipulation_Suffix2Add,
IPOutboundManipulation_PrivacyRestrictionMode;
For example:
IPOutboundManipulation 1 = 0, 2, 4, "*", "*", "*", "*", 0, -1, 0, 0, 0, 0,
255, "", "", 0;
Note: For a detailed description of this table, see 'Configuring IP-to-
IP Outbound Manipulations' on page 460 .
53.15 Standalone Survivability Parameters
The Stand-alone Survivability (SAS) parameters are described in the table below.
SAS Parameters
Parameter Description
Web: Enable SAS
EMS: Enable
[EnableSAS]
Enables the Stand-Alone Survivability (SAS) feature.

[0] Disable (default)

[1] Enable
When enabled, the device receives the registration requests from
different SIP entities in the local network and then forwards them to the
defined proxy. If the connection to the proxy fails ('Emergency Mode'),
the device serves as a proxy by allowing calls internal to the local
network or outgoing to PSTN.
Note: For this parameter to take effect, a device reset is required.
Web: SAS Local SIP UDP
Port
EMS: Local SIP UDP
[SASLocalSIPUDPPort]
Defines the local UDP port for sending and receiving SIP messages for
SAS. The SIP entities in the local network need to send the registration
requests to this port. When forwarding the requests to the proxy
('Normal Mode'), this port serves as the source port.
The valid range is 1 to 65,534. The default is 5080.
Web: SAS Default
Gateway IP
EMS: Default Gateway IP
[SASDefaultGatewayIP]
Defines the Default Gateway used in SAS 'Emergency Mode'. When
an incoming SIP INVITE is received and the destination Address-Of-
Record is not included in the SAS database, the request is immediately
sent to this default gateway.
The address can be configured as an IP address (dotted-decimal
notation) or as a domain name (up to 49 characters). You can also
configure the IP address with a destination port, e.g., "10.1.2.3:5060".
The default is a null string, i.e., the local IP address of the gateway.
Web: SAS Registration
Time
EMS: Registration Time
[SASRegistrationTime]
Defines the value of the SIP Expires header that is sent in a 200 OK
response to an incoming REGISTER message when in SAS
'Emergency Mode'.
The valid range is 10 to 2,000,000. The default is 20.
Web: SAS Local SIP TCP
Port
EMS: Local SIP TCP Port Defines the local TCP port used to send/receive SIP messages for the
SAS application. The SIP entities in the local network need to send the
registration requests to this port. When forwarding the requests to the