AudioCodes Mediant 2600, Быстрая настройка

Страница: 29 / 50

AudioCodes Mediant 4. Configuring the Device
BroadCloud Hosted UC 29 AudioCodes Mediant CRP
Note:
•
The device's reset may take a few minutes (even up to 30 minutes) depending on the
.cmp file version.
•
After the reset, the device's IP address will be the 'default' IP address 192.168.0.2
(see also Section
3.1 ).
After the device finishes the installation process and is reset, the following Wizard
page is displayed, showing the installed software version and other files (ini file and
auxiliary files) that you may also have installed:
Figure 4-7: Software Upgrade Process Completed Successfully
12. Click End Process to close the Wizard; the Web Login dialog appears.
13. Enter your login username and password ( Admin , Admin respectively), and then click
Login ; a message box appears informing you of the new .cmp file version.
14. Click OK ; the Web interface becomes active, reflecting the upgraded device.