Controls and Functions
9
17. IN / OUT JACKS
You can use this connection if you have another pre-amp audio source or connect two or more
AX303P units together.
18. SUBWOOFER OUTPUT JACKS
Connect the RCA cable to the subwoofer channel of the amplifier input.
19. MID-RANGE OUTPUT PORT
Connect the RCA cable to the rear channel of the amplifier input.
20. HIGH-PASS OUTPUT JACKS
Connect the RCA cables to the front channel of the amplifier input.
21. POWER TERMINAL
Make connections using the supplied detachable plug. Connect the "B+" terminal to the battery
positive (+). Connect the "B-" terminal to chassis ground. Connect the REMOTE terminal to a 12V
(switched) DC source to allow the bass driver to be turned on/off by the head unit.
22. POWER LED
This blue LED light up when the unit is on.
1. SUBWOOFER GAIN CONTROL
This control adjusts the subwoofer gain control.
2. Q SELECT
Allows independent, continuous change of the boost frequency bandwidth (Q-factor) for each band
from 20 (narrow bandwidth, steep slope), to 2 (wide bandwidth, gentle slopes).
2
1
MAX
2
20
AX202P
REMOTE CONTROLLER
MIN
LEVEL
Q.
REMOTE CONTROL UNIT
