Audioaccess PX-600, Дополнение к руководству по обслуживанию

Страница: 257 / 278

Madrigal Audio Laboratories
P.O. Box 781
Middletown, CT 06457-0781
(860) 346-0896
FAX (860) 347-6251
Technical Services
Information Sheet
DSS P
ROGRAMMING
JULY 17, 1997 Page 1 of 2
DSS Programming Page 1
DOC# AA91797 WB-TS / FB-DW
OVERVIEW
There are two possibilities for programming the DSS in a PX-600 system, using your choice of source inputs. Each method
has its pros and cons, but one of them should work for your particular client’s needs. Follow the examples below to program
a DSS to suit the customers needs.
SAMPLE # 1: (SEE FIGURE 1, HIGH-CAPACITY CD OPTION)
Caution: using this method will take away the option of having a High-capacity CD player in the system with group control.
Additionally, the response time between changing channels tends to run a little slower. The advantage to using this method
is that you do not have to use any of the DSS program features, leaving them open for their intended use.
To start the programming To start the programming
1) Go to LEARN IR.
2) Go to CD
3) Go to OTHER HIGH CAP (If the unit does have discrete IR power, you must first go to LOW CAP and enter a power
command).
4) Follow the steps outlined below to program your presets (groups), up to six.
5) The STOP command is not used. Leave this address in memory empty.
6) At SKIP TRACK, enter the DSS code for “channel up”.
7) Enter the number of presets (groups), up to 6. This sample is based on a total of 30 stations, with presets set at 5 station
increments. The “delay” command is optional, as this will add a .7 second delay between commands if necessary to
run the macro correctly. It depends on your particular unit. You may want to try it without the delay first. If there is more
than one group, make sure GROUP 1 is the same as the “PLAY” macro .The first press and hold will go to GROUP 2.
Figure # Figure #1 HIGH CAP CD 1 HIGH CAP CD
SAMPLE PROGRAMMING TABLE FOR Sony DSS
PX-600 DISPLAY DSS IR REMOTE BUTTON
INPUT IR FOR PLAY STEP 1 5
INPUT IR FOR PLAY STEP 2 DELAY
INPUT IR FOR PLAY STEP 3 0
INPUT IR FOR PLAY STEP 4 DELAY
INPUT IR FOR PLAY STEP 5 0
INPUT IR FOR PLAY STEP 6 ENTER (OPTIONAL)
INPUT IR FOR STOP NOT USED
INPUT IR FOR SKIP TRACK CHANNEL UP
NUMBER OF GROUPS # 6
INPUT IR FOR GROUP 1 STEP 1 5 (FIRST DIGIT OF DESIRED STATION)
INPUT IR FOR GROUP 1 STEP 2 DELAY
INPUT IR FOR GROUP 1 STEP 3 0 (SECOND DIGIT OF DESIRED
STATION)
INPUT IR FOR GROUP 1 STEP 4 DELAY
INPUT IR FOR GROUP 1 STEP 5 0 (THIRD DIGIT OF DESIRED STATION)
INPUT IR FOR GROUP 1 STEP 6 ENTER (OPTIONAL)
INPUT IR FOR GROUP 2 STEP 1 5 (FIRST DIGIT OF DESIRED STATION
INPUT IR FOR GROUP 2 STEP 2 DELAY
INPUT IR FOR GROUP 2 STEP 3 0 (SECOND DIGIT OF DESIRED
STATION)
INPUT IR FOR GROUP 2 STEP 4 DELAY
INPUT IR FOR GROUP 2 STEP 5 5(THIRD DIGIT OF DESIRED STATION)
INPUT IR FOR GROUP 2 STEP 6 ENTER (OPTIONAL)