Audio2000's AKJ7002 Скачать руководство пользователя страница 17

SERVICE INFORMATION

SHIPPING DAMAGE

If the shipping carton is found to be damaged, notify the delivery company immediately.  
Save the damaged carton as evidence for the delivery company to inspect.  It is the 
responsibility of the consignee to file a claim with the delivery company for any damaged 
that occurs during shipping.  In the case that the shipping carton is in good condition but 

®

the unit is damaged or defective, call 

Audio2000'S

 at 805-523-2759.

FACTORY SERVICE

®

If the equipment needs factory service, call 

Audio2000'S

 at 805-523-2759 for a Return 

Authorization number (RA number) and the address of the authorized service 
representatives.  Insure and ship the product, prepaid, in its original carton along with 
proof of purchase in the form of a bill of sale or receipted invoice to the above address.  
Please clearly write the RA number on the shipping carton.  Also enclose a note 
describing the problem along with any other helpful information such as where and 
how the unit was used.

LIMITED WARRANTY

®

H&F Technologies, Incorporated (H&F) hereby warrants that 

Audio2000'S

 products will be 

free from defects in material and workmanship  for a period of 1 (one) year from date of 
purchase.   At its option, H&F will repair or replace the defective product and promptly 
return it to you.

  

The Limited Warranty will not cover any item that has been, in H&F's estimation, 
subject to alteration, misuse, neglect, accident or improper installation. In addition, 
any service not performed  by H&F or an authorized service center will terminate terms 
of this warranty.  Normal wear and tear of this product will not be covered by this or any 
implied warranty.

No liability will be accepted for damages/loss directly caused from the use of 
this product.  
H&F's liability shall be limited to the repair/replacement of this product if found 
to be defective.

© 

2010 H & F Technologies, Incorporated    (website: 

www.audio2000s.com

)

SERVICE INFORMATION

15

Содержание AKJ7002


















Отзывы: