- 10 -
A10-RX User Guide
System Sub-Menu
ª
All settings are Global.
Selections
Icon Description
Options
Exit
Returns the main menu
Power
Turns power to the RF receiver for each of the two channels
on and off.
•
1
- channel 1 only
•
1 and 2
- both channel 1 and 2
•
2
- channel 2 only
•
Off
- receiver circuits off
Restore
The restore function allows the user to reset the A10-RX to
the factory default settings
ª
Restore sets the TV Channel Map to region Z. Select the
current region in your locality before proceeding.
Info
Shows numerous attributes of the transmitter
• Serial Number
• Firmware Revision
• Frequency Band
Basic Operation
Frequency Selection
The A10 Digital Wireless System operates in the UHF frequency band from 470 to 694 MHz.
The A10-RX can tune across the entire range of the system
Because the A10 digital RF transmission is inherently immune to intermodulation multiple A10
Digital Wireless systems can be used simultaneously on nearby adjacent frequencies without
worry of intermodulation interference Systems can be used together when separated by at least
400 kHz
Manually Setting Channel, Sub Channel, Frequency
To simplify frequency selection, frequencies are divided into channels and sub channels. The
specific frequencies corresponding to channels and sub channels depends on the setting of the
TV Channel Mapping (
Main > Settings > TV Ch Map
) Three options are available, 6, 7, and 8
MHz spacing, X, Y, and Z respectively These three settings generally correspond to three main
geographic regions, the Americas, Australia/New Zealand, and Europe, respectively For more
information, see
Channel Assignments by Region
• Channel
- corresponds to broadcast television channels used in a geographic region De-
pending on the selected channel mapping, channels cover 6, 7, or 8 MHz
• Sub Channel
- channels are divided in 400 kHz increments called sub channels to speed up
frequency selection. The number of sub channels depends on the channel mapping selected.
• Frequency
- specific frequencies within the receivers tuning range can be selected in 25
kHz increments. When a selected frequency does not correspond with a channel/sub channel
mapping, an asterisk character (*) is shown in the display adjacent to channel/sub channel
assignment below the frequency shown.
To change TV channels:
1 Use the Left button to highlight the TV Channel
2 Press the centre menu to select the TV channel
3 Select the sub channel until the desired sub-channel is selected
