Fan cut-out
(Fan is optional)
Short bolt
(x6)
Wood Screw
(x16)
Wood
screws
(x16)
Mending plate
(x2)
AUDIO VISUAL FURNITURE INTERNATIONAL
288 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local: 905-751-1459
Page 4
of 6
Step 7
Adding
L
egs to the
R
ack
Using
a P
hil
l
ips screwdriver or drill,
s
crew
all 4 legs to the bottom of the rack using
included wood screws.
Leg height adjustment: Adjust the legs to
the lowest position.
Step 8
Adding
R
ackrails to the
R
ack
1)
Using
a
wrench or socket and included hex bolts.
Screw
both rackrails into the metal inserts already in the sides.
2)
Carefully roll the rack over onto its legs. (not shown)
Do not lift by the wings
Step 9
Positioning and
A
ttaching
B
ridge
Position rack space where required
holding bridge in place as a spacer.
Bridge may be attached to a wall
(shown),furniture or a TP1000 stand.
There are 2 bridge lengths included.
Which to use will be determined by
camera requirements and space
available.
We suggest using the short bridge
for the closed (long) configuration.
Wall
and / or
