V
F
I
Assembly Instructions
PM2-S/D/XL/CS
Mounts
Thank you for purchasing AVFI’s PM2-series mount.
This product is designed for mounting to a table, cart or credenza at approx. 30” height.
Read these instructions start to finish before beginning installation.
Note: If you cannot understand these instructions or are concerned about safety of the installation contact a qualified
contractor or contact AVFI at 1-877-834-3876
Supplied Parts- Box 1 Main
Rectangular tube
(1)
Supplied Hardware- Bag (PM2-Mount)
M8 X 12
(2)
2
www.video-furn.com
288 Don Hillock Drive |Aurora |Ontario|L4G 0G9 | 1.877.834.3876
M6 X 10
(3)
Base
(1)
Not all hardware supplied will be used, depending on setup and the manufacturer of your display.
Base washer
(1)
Tools required
Tube locker
(1)
Main pillar
(1)
Camera neck
(1)
Camera plate
(1)
Mount Parts- Box 2 Parts and quantity will vary depending on model.
Hardware
bag (1)
PM2-Mount
TV hardware bag
Single (1)-Dual (2)
TV Brackets
Single (2) Dual(4)
Grommet
(1)
M10
Nut
x2
10-32
Nut
x2
M8 Hex key
x1
M6 Hex key
x1
Camera
bag (1)
11mm or
7/16” drill bit
(1)
Wrench or socket
set
(1)
2” hole saw
(1)
Cordless drill/driver
(1)
Phillips screwdriver
(1)
