U853R & U853RW
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com
0001-0159-01
In the interest of standards development, A.T.U.S. offers full
details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm
2
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One.
Specifications are subject to change without notice.
Specifications
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
SCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
0˚
150˚
120˚
90˚
30˚
60˚
12" or more on axis
LEGEND
Frequency in Hertz
Response in dB
10 dB
100
50
200
10k
5k
1k
500
2k
20k
Roll-off
frequency response: 30–20,000 Hz
polar pattern
Fixed-charge back plate, permanently
polarized condenser
Cardioid
30-20,000 Hz
80 Hz, 18 dB/octave
–39 dB (11.2 mV) re 1V at 1 Pa
250 ohms
139 dB SPL, 1 kHz at 1% T.H.D.
115 dB, 1 kHz at Max SPL
70 dB, 1 kHz at 1 Pa
11-52V DC, 2 mA typical
Flat, roll-off
Microphone: 14 g (0.5 oz)
Power module: 81 g (2.9 oz)
Microphone: 34.0 mm (1.34") long,
12.2 mm (0.48") diameter
Power module: 92.9 mm (3.66") long,
18.9 mm (0.74") diameter
Power module: Integral 3-pin XLRM-type
7.6 m (25.0') long (permanently attached
to microphone), 3.2 mm (0.13") diameter,
2-conductor shielded cable with TA3F-
type connector
UE-O omnidirectional (360°)
UE-H hypercardioid (100°)
UE-UL UniLine
®
(90°)
M12
AT8538 power module; AT8451 steel
hanger; AT8153 two-stage foam wind-
screen; AT8438
5
/
8
"-27 stand adapter
AT8538 power module; AT8451(WH)
steel hanger; AT8153(WH) two-stage
foam windscreen; AT8438
5
/
8
"-27 stand
adapter
Element
Polar pattern
Frequency response
Low frequency roll-off
Open circuit sensitivity
Impedance
Maximum input sound level
Dynamic range (typical)
Signal-to-noise ratio
1
Phantom power requirements
Switch
Weight
Dimensions
Output connector
Cable
Optional interchangeable elements
Audio-Technica case style
Accessories furnished
U853R
U853RW
0.48"
12.2 mm
10.0 mm
0.39"
24.0 mm
0.95"
0.13"
3.2 mm
25'
7.6 m
response of 30 Hz to 20,000 Hz. It shall be capable of accepting optional
interchangeable elements for additional polar patterns. The microphone
shall operate from an external 11V to 52V DC phantom power source.
It shall be capable of handling sound input levels up to 139 dB with a
dynamic range of 115 dB. Nominal open-circuit output voltage shall be
11.2 mV at 1 V, 1 Pascal. Output shall be low impedance balanced (250
ohms). It shall offer outstanding rejection of radio frequency interference
(RFI).
The microphone shall have a permanently attached 7.6 m (25') miniature
cable terminating in a special TA3F-type output connector designed
to optimize RFI immunity. The output connector shall connect to a
TB3M-type jack on the included power module. The power module shall
contain a recessed switch to permit choice of flat response or 80 Hz
low-frequency roll-off. The output of the power module shall be a 3-pin
XLRM-type connector.
An adjustable steel wire hanger shall be provided for suspended
installations. The steel wire hanger shall attach to the microphone body
and allow for the positioning of the microphone without the need for
tools. A two-stage foam windscreen and a
5
/
8
"-27 stand adapter shall also
be included.
The microphone shall be a hanging design, with an overall length of
34.0 mm (1.34") and a head adapter of 12.2 mm (0.48"). Weight shall
be 14 grams (0.5 oz) without cable. The microphone, cable and steel
hanger shall be black [white].
The Audio-Technica U853R [U853RW] is specified.
347
