background image

Optional System Accessories

MICROPHONES

AT829cW

AT829 miniature cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes 
clothing clip and windscreen.

MT830cW

MT830R subminiature omnidirectional condenser microphone
only, terminated for use with UniPak transmitter. Includes 
clothing clip and windscreen.

AT831cW

AT831b miniature cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes 
clothing clip and windscreen.

AT851cW

AT851a surface-mount wide-range hemi-cardioid condenser
microphone only. Ideal for high-quality sound reinforcement
and teleconference applications where minimum visibility 
is required. The cable is terminated for use with UniPak 
transmitter.

AT857AMLcW

AT857AMLa 19" gooseneck cardioid microphone only, 
terminated for use with UniPak transmitter. Mounts to 

5

/

8

"-27 thread. Includes windscreen.

ATM35cW

ATM35 wide-range miniature cardioid condenser microphone
only. Uniquely capable of picking up high-intensity sound 
without distortion. The cable is terminated for use with 
UniPak transmitter. Includes UniMount

microphone 

instrument mount. 

ATM75cW

ATM75 headworn cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes 
windscreens and cable clip.

PRO8HEcW

PRO8HE headworn hypercardioid dynamic microphone 
terminated for use with UniPak transmitter. Includes 
windscreen and cable clip.

RECEIVER ACCESSORIES

ATW-A10

Pair of ground-plane antennas with 

5

/

8

"-27 thread for 

mounting to mic stands, etc. Takes RF cables with PL259 
connectors, not included.

ATW-D12

Active, unity-gain antenna distribution system provides two 
“1-in, 4-out” amplifier/splitters, connects a pair of antennas 
to as many as four diversity receivers. Includes eight 
output cables and two input cable adapters.

ATW-RA1

Rack-mount antenna kit brings antenna inputs to the front 
of receiver for ease of setup, or when receiver is enclosed 
in a metal rack. Includes a pair of extendible antennas.

TRANSMITTER ACCESSORIES

ATW-VP10

Vinyl pouch with belt clip to hold UniPak transmitter.

AT8114

Foam windscreen for handheld transmitter.

AT8141

Water-resistant pouch for UniPak transmitter.

AT8431

Stand clamp for handheld transmitter, 

5

/

8

"-27 threads.

XLRW

Connecting cable for UniPak transmitter with an XLRF-type 
input connector, for Lo-Z microphones with XLRM-type 
output terminations.

6

Specifications

OVERALL SYSTEM

Operating Frequency

VHF high band, 169 MHz to 216 MHz

Frequency Stability

±0.005%, single-frequency 
crystal-controlled

Modulation Mode

FM

Maximum Deviation Range

±30 kHz, traveling frequencies ±15 kHz

Operating Range

200' minimum

Operating Temperature Range

40° F (4° C) to 110° F (43° C)

Frequency Response

100 Hz to 15 kHz

RECEIVER

Receiving System

Dual independent receivers, automatic-
switching diversity reception

Image Rejection

60 dB

Signal-to-noise Ratio

>80 dB at 10 kHz deviation (IEC-weighted)

Total Harmonic Distortion

1% (10 kHz deviation @ 1 kHz)

Sensitivity

10 µV for 60 dB S/N (IEC -weighted)

Audio Output

Unbalanced

350 mV (at 1 kHz, ±10 kHz deviation, 
10k ohm load)

Balanced

220 mV (at 1 kHz, ±10 kHz deviation, 
10k ohm load)

Output Connectors

Unbalanced

1

/

4

" phone jack

Balanced

XLRM-type

Power Supply

12-18V DC, 350 mA, with provided 
AC adapter

Dimensions

16.93" (430.0 mm) W x 1.92" (48.8 mm) H
x 7.28" (185.0 mm) D

Weight

5.5 lbs (2.5 kgs)

Accessories Included

Two whip antennas, rack mount adapters,
AD1205A AC adapter

UNIPAK

TRANSMITTER

RF Power Output

50 mW Max

Spurious Emissions

Under federal regulations

Dynamic Range

90 dB

Input Connections

High impedance, low impedance, bias

Battery

9V (NEDA type 1604) alkaline, 
not included

Current Consumption

30 mA typical

Battery Life

Approximately 15 hours in “H” (high) position
Approximately 20 hours in “L” (low) position

Dimensions

2.56" (65.0 mm) W x 4.33" (110.0 mm) H 
x 1.00" (25.4 mm) D

Net Weight (without battery)

2.8 oz (78 grams)

HANDHELD TRANSMITTER

Polar Pattern

Unidirectional

RF Power Output

50 mW Max

Spurious Emissions

Under federal regulations

Dynamic Range

90 dB

Microphone Element

Audio -Technica Hi-ENERGY

®

dynamic

Battery

9V battery (NEDA type 1604) alkaline, 
not included

Current Consumption

30 mA typical

Battery Life

Approximately 15 hours in “H” (high) position
Approximately 20 hours in “L” (low) position

Dimensions

9.50" (241.3 mm) long, 2.10" (53.3 mm) dia.

Net Weight (without battery)

12.7 oz (360 grams)

Accessory Included

Stand clamp

† In the interest of standards development, A.T.U.S. offers full details on its test methods 

to other industry professionals on request.

Содержание PRO 227









Отзывы: