Audio Technica ES925C6/DS3, Руководство пользователя

Страница: 2 / 5

2
■
Assembly
1. • Insert the gooseneck assembly (c) while rotating it into the desk stand
power module (d).
• Tighten until it does not rotate, and use the hex wrench (h) to tighten the
set screw (g) and set the gooseneck assembly in place.
• Connect the capsule (b) to the gooseneck assembly, and attach the
windscreen (a).
* If the parts are not sufficiently tightened together, problems may occur
such as the LED colors of the gooseneck assembly and power module
not matching or sound is not output.
a
b
c
g
h
d
2. Connect the included cable to the connector (e) on the reverse side of the
desk stand power module, and pass the cable through the wire slot (f).
e
f
■
LED color
1 2 3
OFF RED GREEN YELLOW
4 5 6 7
BLUE MAGENTA CYAN WHITE
■
Wiring
1 2
3
PIN1
(Ground)
PIN2
(Hot)
PIN3
(Cold)