Studio Broadcast System
Page 9 of 11
Ensure that the BP24 system ID is the same as the System ID of the
MCU3224 (system will turn on in “default” system ID 1 for all devices).
The
System ID is visible in all screens on the left-hand side of the display for
“navigation.”
Select the BP24 channel for operation (1 through 24)
Select the desired BP24 gain level
Ensure that the BP24 front surface is facing the RP32 front surface, and that they
are located somewhat in proximity to each other and roughly in a line-of sight
orientation. (Note that the distance of operation can be 90’ or more, depending
upon the particular operating environment, and line of sight operation is not
strictly or fully required due to positive effects of multi-path. However, with only
a single RP connected to the system, the “multiple coordinated receiver diversity”
is not in operation. Thus, line of sight and proximity are more important to stable
operation for initial set-up with only a single RP).
