background image

Optional System Accessories

MICROPHONES AND CABLES

AT829cW

AT829 miniature cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes 
clothing clip and windscreen.

MT830cW

MT830R subminiature omnidirectional condenser 
microphone only, terminated for use with UniPak 
transmitter. Includes clothing clip and windscreen.

MT830cW-TH

“Theater” model, same as MT830cW except beige color 
mic and cable for concealment.

AT831cW

AT831b miniature cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes 
clothing clip and windscreen.

AT851cW

AT851a surface-mount wide-range hemi-cardioid condenser
microphone only, terminated for use with UniPak transmitter.

AT857AMLcW

AT857AMLa 19" gooseneck cardioid microphone only, 
terminated for use with UniPak transmitter. Mounts to 

5

/

8

"-27 thread. Includes windscreen.

ATM35cW

ATM35 high-intensity cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes AT8418 
clip-on instrument mount.

ATM73cW

ATM73a headworn cardioid condenser microphone only, 
terminated for use with UniPak transmitter.

ATM75cW

ATM75 headworn cardioid condenser microphone only, 
terminated for use with UniPak transmitter. Includes 
windscreens and cable clip.

PRO 8HEcW

PRO 8HEx headworn hypercardioid dynamic microphone, 
terminated for use with UniPak transmitter. Includes 
windscreen and cable clip.

PRO 35xcW

PRO 35x cardioid condenser microphone only, terminated 
for use with UniPak transmitter. Includes AT8418 clip-on 
instrument mount.

AT-GCW

Hi-Z instrument/guitar cable with 

1

/

4

" phone plug, 

terminated for use with UniPak transmitter.

XLRW

Connecting cable for UniPak transmitter with an XLRF-type 
input connector, for Lo-Z microphones with XLRM-type 
output terminations.

TRANSMITTER ACCESSORIES

ATW-VP10

Vinyl pouch with belt clip to hold UniPak transmitter.

AT8114

Foam windscreen for handheld transmitter.

AT8141

Water-resistant pouch for UniPak transmitter.

AT8431

Stand clamp for handheld transmitter, 

5

/

8

"-27 threads.

RECEIVER ACCESSORIES

ATW-D70

UHF (728-750 MHz) unity-gain antenna distribution system 
provides two “1-in, 4-out” RF channels; connects a pair of 
antennas to as many as four diversity receivers. Includes 
four DC-to-DC interconnect cables and two rack-mount 
adapters.

ATW-D90

Same as ATW-D70 except for 940-955 MHz operation.

ATW-RA1

Rack-mount antenna kit brings antenna inputs to the front 
of receiver for ease of setup, or when receiver is enclosed 
in a metal rack. Includes a pair of extendible antennas.

6

Specifications

OVERALL SYSTEM

Operating Frequency

UHF band, 732 MHz to 746 MHz (U.S. 
and Canada); 944 MHz to 952 MHz (U.S. 
only)

Frequency Stability

±0.005%

Modulation Mode

FM

Maximum Deviation

±15 kHz

Operating Range

200' minimum

Operating Temperature Range

40° F (4° C) to 110° F (43° C)

Frequency Response

100 Hz to 15 kHz

RECEIVER

Receiving System

Dual independent receivers, automatic-
switching diversity reception

Image Rejection

45 dB minimum

Signal-to-noise Ratio

85 dB minimum at 10 kHz deviation 
(IEC-weighted)

Total Harmonic Distortion

1% (10 kHz deviation at 1 kHz)

Sensitivity

20 µV for 60 dB S/N (IEC -weighted)

Audio Output

Unbalanced

350 mV (at 1 kHz, ±10 kHz deviation, 
10k ohm load)

Balanced

220 mV (at 1 kHz, ±10 kHz deviation, 
10k ohm load)

Output Connectors

Unbalanced

1

/

4

" phone jack

Balanced

XLRM-type

Power Supply

12-18V DC, 150 mA

Dimensions

16.93" (430.0 mm) W x 1.92" (48.8 mm) H
x 7.28" (185.0 mm) D

Weight

5.5 lbs (2.5 kgs)

Accessories Included

Two antennas, rack mount adapters,
AD1205A AC adapter

UNIPAK

TRANSMITTER

RF Power Output

50 mW Max

Spurious Emissions

Under federal regulations

Dynamic Range

90 dB

Input Connections

High impedance, low impedance, bias

Battery

9V (NEDA type 1604) alkaline, not included

Current Consumption

50 mA typical

Battery Life

Approximately 8 hours in High position
Approximately 10 hours in Low position

Dimensions

2.56" (65.0 mm) W x 4.33" (110.0 mm) H 
x 1.00" (25.4 mm) D

Net Weight (without battery)

3.2 oz (90 grams)

HANDHELD TRANSMITTER

RF Power Output

50 mW Max

Spurious Emissions

Under federal regulations

Dynamic Range

90 dB

Microphone Element

Dynamic unidirectional

Battery

9V (NEDA type 1604) alkaline, not included

Current Consumption

50 mA typical

Battery Life

Approximately 8 hours in High position
Approximately 10 hours in Low position

Dimensions

9.53" (242.0 mm) long, 2.13" (54.0 mm) 
diameter.

Net Weight (without battery)

12.3 oz (350 grams)

Accessory Included

AT8431 stand clamp

† In the interest of standards development, A.T.U.S. offers full details on its test methods 

to other industry professionals on request.

Содержание ATW-1951









Отзывы: