6
Connecting via Bluetooth wireless technology
Pairing a Bluetooth device
• Read the user manual for the Bluetooth device.
• Place the device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Starting with the product turned off, slide the power switch to the “ON” position.
• The indicator lamp will light in white, and then flash.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, "ATH-SR30BT" will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user manual.
3. Select "ATH-SR30BT" to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also
be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
About pairing
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the
product are paired, you do not need to pair them again.
However, in the following cases you will need to pair again even if the Bluetooth device was paired once:
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• If 9 or more devices are paired.
(This product can save the pairing information of up to 8 devices. When you pair with a new device after pairing with
8 devices, pairing information for the device with the oldest connection date will be overwritten by the information for
the new device.)
• When switching Bluetooth devices, you may be unable to pair
because the previously connected Bluetooth device cannot be
disconnected. In this case, press and hold the volume buttons (+ and
-) as shown in the figure for about 6 seconds. The product will start
“searching for devices” and you can pair Bluetooth devices that you
want to connect.
100%
12:00
Bluetooth
ON
ATH-SR30BT
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
