7
Connective via Bluetooth wireless technology
Pairing a Bluetooth device
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
• Read the user manual for the Bluetooth device.
• Place the device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Starting with the product turned off, slide the power supply button to the “ON” position.
• The indicator lamp will quickly flash in blue.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, “ATH-SPORT60BT” will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user manual.
3. Select “ATH-SPORT60BT” to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey may
also be called a passcode, PIN code, PIN number, or password.
• The product plays a confirmation tone and voice guidance when pairing is complete.
100%
12:00
Bluetooth
ON
ATH-SPORT60BT
About pairing
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the product
are paired, you do not need to pair them again. The product supports multipairing, which saves pairing history.
However, in the following cases, pairing is necessary even if the Bluetooth devices have been paired previously.
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• When switching Bluetooth devices, you may not be able to pair
because the previously connected Bluetooth device cannot be
disconnected. In this case, press and hold (for about 6 seconds) the
volume buttons simultaneously (+ / -). The product will search for
devices and you can pair with the desired Bluetooth device.