Audio Technica ATH-CK3TW, Руководство пользователя

Страница: 11 / 25

10
Connecting via Bluetooth
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the product
are paired, you do not need to pair them again. The product supports multipairing, in which a connection history is saved.
However, in the following cases you will need to pair again even if the Bluetooth device was paired once:
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• When switching to a new Bluetooth device, you may not be able to
pair because the previously connected Bluetooth device cannot be
disconnected. In such cases, place the headphones into the charging
case (with battery level remaining for the case) and long touch (about 4
seconds) the touch sensor area on the R (right) side. The indicator lamp
will flash in white. After it flashes in white, long touch (about 2 seconds)
the touch sensor area on the R (right) side. After the L (left)/R (right)
indicator lamps light in red, they will turn off and then light in white. If
you remove the headphones from the charging case in that state, the
product will switch to the “searching for devices” state and you will be
able to pair with your desired Bluetooth device.
• Perform the operation above within 30 seconds of placing the headphones
into the charging case.
About pairing
The product supports Qualcomm TrueWireless™ Stereo Plus, which reduces sound interruption and latency through
independent transmission on each side. This feature requires connection with a Bluetooth device that supports Qualcomm
TrueWireless™ Stereo Plus, such as a smartphone.
About Qualcomm TrueWireless™ Stereo Plus