7
Connecting via Bluetooth wireless technology
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
Pairing a Bluetooth device
• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Starting with the product turned off, slide the power switch to the “ON” position.
• The multi-indicator lamp will light in white, and then flash in white.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, “ATH-ANC900BT” will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user manual.
• This product may be displayed as “ATH-ANC900BT”, “BLE_ATH-ANC900BT”, or both. If both are displayed, select
“ATH-ANC900BT”. If only one is displayed, select that one.
3. Select “ATH-ANC900BT” to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
• Pairing a second device or more may take some time. In such cases, wait until
the multi-indicator lamp (p.15) indicates “pairing” .
About pairing
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the
product are paired, you do not need to pair them again. The product supports multi-pairing, in which a connection
history is saved.
However, in the following cases you will need to pair again even if the Bluetooth device was paired once:
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• When switching to a Bluetooth device, you may not be able to
pair because the previously connected Bluetooth device cannot be
disconnected. In such cases, long touch (10 seconds) the upper and
center parts of the touch panel as shown in the figure. The product
will switch to the “searching for devices” state and you will be able
to pair with your desired Bluetooth device.
100%
12:00
Bluetooth
ON
ATH-ANC900BT
