Audio Technica ATCS-60, Инструкция по эксплуатации

Страница: 28 / 56

P27
AUTO
OFF
ON
MANUAL
6.6. Setting method for MIX MODE switch (ATCS-M60a only)
6.7.
MIX MODE should be set to ON when microphone units that perform automatic mode operation
and microphone units that perform manual mode operation are used together.
* When this function is not used, turn the setting to OFF to prevent erroneous setting.
* Set MIX MODE while the power supply to the microphone unit is turned off.
* When the power supply to the microphone unit is turned on while the MIX MODE switch is set to
ON, the light ring LED lights.
1. The MIX MODE switch is located on the bottom of the microphone unit.
2. Set the MIX MODE switch by using a small-sized screwdriver (refer to the setting example shown below).
3. Through a combination of the MIX MODE setting and the setting of the master control unit or
Conference Manager, mixed operation can be performed.
Setting of master control unit/Conference Manager
Priority
microphone unit
Priority
microphone unit
Non-priority
microphone unit
Non-priority
microphone unit
MIX MODE
setting
Automatic Automatic
Automatic
Automatic Manual
Manual Manual
Manual
When the priority microphone is set, it is possible to suspend the speech and speech-request
functionality of all microphone units other than the chairperson's by holding down (for 2 seconds
or longer) the TALK button on the chairperson's microphone unit (ID 001).
* Note that only when the priority microphone is set and the MIX MODE is set to ON, is the operation
mode the inverse of the mode that is set on the master control unit/Conference Manager.
Prohibition of speech from all microphones is lifted.
All finish from chairperson’s microphone