Audio Technica AT2005USB, Инструкция по эксплуатации

Страница: 13 / 15

13
Additional Information
Using headphones
The
1
/
8
" (3.5 mm) headphone jack on the bottom of the microphone allows you to directly monitor
your recording with a pair of headphones. When your preliminary setup is completed, and your USB
microphone is connected to your computer’s USB port (the microphone’s blue LED is illuminated), plug
your headphones into the headphone jack on the bottom of the microphone. While talking into the
microphone, you should hear yourself in the headphones. Adjust the volume up or down by rotating
the the Up/ Down dial on the bottom of the microphone.
Note: The Up/ Down dial only adjusts the
volume of the mic’s headphone output; it does not adjust the microphone level.
Selecting software
You have many choices in recording software. Audacity, available for free online at
http://audacity.sourceforge.net/, is a widely used software program that provides basic recording software.
Setting your software levels
Correct adjustment of microphone level is important for optimum performance. Ideally, the microphone
level should be as high as possible without overloading the input of your computer. If you hear
distortion, or if your recording program shows levels that are consistently overloaded (at peak levels),
turn the microphone volume (or level) down, either through your control panel (or system preferences)
settings, or through your recording software. If your recording program shows insufficient level, you
can increase the microphone gain either from the control panel (or system preferences) settings or
through your recording program.
No further microphone level adjustments should be needed, as long as the acoustic input does not
change significantly.
Positioning your microphone
It is important to position the microphone directly in line (on axis) with the person speaking/singing or
instrument (or other sound source) to achieve the best frequency response of the microphone.
For use in speaking/singing applications, the ideal placement for the microphone is directly in front of
the person speaking/singing. The same placement is optimal when miking an instrument such as an
acoustic guitar, drums or piano. Experiment with different mic placements to find the best sound for
your particular setup.
XLR operation
For live-sound applications, connect the XLRF connector of the included XLR cable to the XLRM
output on the bottom of the microphone; connect the cable’s XLRM connector to a standard XLRF
microphone input on your mixer. Turn the microphone’s ON/OFF switch to the “ON” position. Set the
microphone’s level by following the instructions included with your mixer.
Note: The ON/OFF switch
does not affect the LED.
Protecting your microphone
Take care to keep foreign particles from entering the windscreen. An accumulation of iron or steel
filings on the diaphragm, and/or foreign material in the windscreen’s mesh surface, can degrade
performance.