Audio Technica AT-WLA1, Руководство пользователя

Страница: 7 / 16

6
Attaching the product to the headphones
Attaching the ear hooks (included for headphones that wrap around the ear)
Attach this product to a pair of headphones. For details
on the recommended headphones, see "Recommended
headphone models" (p. 14).
• Turn this product off, remove the USB charging cable,
and then connect or disconnect the headphones.
Attaching the product
Align the "L" (LEFT) and "R" (RIGHT) headphones with
this product's corresponding cable connectors and
then insert the cables into the headphones as shown
in the figure until you hear a click.
Removing the product
Holding the bushing of this product's cable
connector, pull straight in the direction of the arrow
to remove the product.
*1 There is a delicate pin on the headphone side of the connecting
part. Exercise caution when handling this part. If you pull on or
insert this part at an angle, the pin may bend, which may result
in malfunctions.
*2 Do not touch this product's connectors directly. Doing so may
lead to contact failure.
Holding the bushing of this
product's cable connector,
insert/remove it straight in the
direction of the arrow.
*2
Cable side
Headphone
side
Headphone
Pin *1
L: LEFT
R: RIGHT
Attaching the product
For headphones that wrap around the ear, you can
attach the product to the ear hooks after attaching the
product to the headphones.
Check the sides of the ear hooks marked "L" (LEFT) and
"R" (RIGHT), and then attach the "L" ear hook to the "L"
side of the product and the "R" ear hook to the "R" side
of the product.
Insert the product's bushing and cable into the groove
on the inside of the ear hook.
L
1
2